Application
Grinding
Metal
Ferrous metals (iron, steel, welds, etc.)
Die Grinder
"O" = 1/2" See Tech Info
A36Q
Resin Bonded Mounted Points
- Aluminum oxide grain
- For deburring and finishing
- Fast stock removal
- Shank Length 1-1/2″
- These mounted bonded points are a low cost alternative to carbide burs
- Each point is dressed for perfect balance to perform without vibration or run-out
- Mandrel overhang "O" must always be the lowest possible. Maximum speeds given refer to overhang "O" equal to 1/2"
Click the sections below to expand
| Length | Type | Dia | Shank Diameter | Max RPM | Qty | PART # | |
| 3/4" | B52 | 3/8" | 1/4" | 45370 | 10 | 27407 | Buy Now |
| Length | Type | Dia | Shank Diameter | Max RPM | Qty | PART # | |
| 1-1/4" | W179 | 3/8" | 1/4" | 45750 | 10 | 27408 | Buy Now |
| 1/2" | W189 | 2" | 1/4" | 24000 | 10 | 27409 | Buy Now |
| 3/4" | W204 | 3/4" | 1/4" | 42750 | 10 | 27410 | Buy Now |
| 2" | W208 | 3/4" | 1/4" | 18750 | 10 | 27411 | Buy Now |
| 1" | W220 | 1" | 1/4" | 25500 | 10 | 27412 | Buy Now |
| 2" | W222 | 1" | 1/4" | 15900 | 10 | 27413 | Buy Now |
| 1/2" | W236 | 1-1/2" | 1/4" | 25470 | 10 | 27414 | Buy Now |
