Search Results for: Viagra Approved Pharmacy ⭐ www.HealthMeds.online ⭐ Buy Viagra 100mg - Cheap Viagra Online

Total '213' results found.

  • Convenient option when using a right angle grinder
  • Premium ceramic blend
  • Highly resistant open structure allows for very fast removal of surface contaminants
  • Very aggressive material removal
  • Exceptional performance for removing paints, sealants, rust, scale and varnishes
Application
Blending, Surface Preparation
Metal
Ferrous and/or non-ferrous metals
Stainless
Stainless steel, high tensile steel
  • Great for controlled material removal while imparting a final finish
  • Able to remove coated abrasive grind marks and polish welds
  • Applications include cleaning, deburring, blending and polishing
  • Great for edge breaking and final finishing
Application
Grinding, Finishing, Cleaning, Polishing
Stainless
Stainless steel, high tensile steel
Aluminum
Aluminum
Metal
Ferrous metals
  • Silicon carbide grain for fast cut rate and finest finish
  • Provides best durability, stock removal, and finest finish for increased productivity
  • Available in two densities
  • Medium Density: Comparable to competitive 8SF , Excellent starting point for general purpose deburring, blending, and weld polishing
  • Hard Density: Comparable to competitive 9SF products, Excellent for aggressive deburring, blending
Application
Finishing, Blending
Metal
Ferrous and non-ferrous materials
Aluminum
Aluminum
Stainless
Stainless steel, high tensile materials
  • Great for controlled material removal while imparting a final finish
  • Able to remove coated abrasive grind marks and polish welds
  • Applications include cleaning, deburring, blending and polishing
  • Great for edge breaking and final finishing
Application
Grinding, Finishing, Cleaning, Polishing
Stainless
Stainless steel, high tensile steel
Aluminum
Aluminum
Metal
Ferrous metals
  • Convenient option when using a right angle grinder
  • Fast, safe removal of surface contaminants
  • Excellent for cleaning welds, removing corrosion, rust, scaling, and blending
  • Great for removing paints, varnishes and sealants from difficult to reach surfaces
Application
Blending, Surface Preparation
Metal
Ferrous and/or non-ferrous metals
Stainless
Stainless steel, high tensile steel
  • Arbor hole for easy mounting to grinder shaft
  • Fast, safe removal of surface contaminants
  • Excellent for cleaning welds, removing corrosion, rust, scaling, and blending
  • Great for removing paints, varnishes and sealants from difficult to reach surfaces
Application
Blending, Surface Preparation
Metal
Ferrous and/or non-ferrous metals
Stainless
Stainless steel, high tensile steel
  • Sait-Lok-R™ Nylon screw threaded hub for easy mounting to the backing pad
  • Premium ceramic blend
  • Highly resistant open structure allows for very fast removal of surface contaminants
  • Very aggressive material removal
  • Exceptional performance for removing paints, sealants, rust, scale and varnishes
Application
Blending, Surface Preparation
Metal
Ferrous and/or non-ferrous metals
Stainless
Stainless steel, high tensile steel
  • Nylon attachment on disc ensures a secure fit to the backing pad
  • High durability with superior edge retention and minimal smearing
  • For aggressive applications where traditional surface conditioning products fail
  • Ideal for highly contoured surfaces, heavy blending and finishing and sharp edges
Application
Deburring, Cleaning
Stainless
Stainless steel
Metal
Ferrous and/or non-ferrous metals
Wood
Fiberglass, gaskets
  • Sait-Lok-R™ Nylon screw threaded hub for easy mounting to the backing pad
  • Fast, safe removal of surface contaminants
  • Excellent for cleaning welds, removing corrosion, rust, scaling, and blending
  • Great for removing paints, varnishes and sealants from difficult to reach surfaces
Application
Blending, Surface Preparation
Metal
Ferrous and/or non-ferrous metals
Stainless
Stainless steel, high tensile steel
  • Hook & Loop fastening system allows for quick changes and less downtime
  • Used in a wide variety of applications including cleaning, polishing, blending and deburring
  • Non-woven synthetic fiber coated with aluminum oxide grain resists loading for long life without damage to or removal of base material
Application
Deburring, Cleaning
Stainless
Stainless steel, high tensile steel
Metal
Ferrous and/or non-ferrous materials
Wood
Fiberglass, gaskets
  • Sait-Lok™ nylon attachment on disc ensures a secure fit to the backing pad
  • Fast, safe removal of surface contaminants
  • Excellent for cleaning welds, removing corrosion, rust, scaling, and blending
  • Great for removing paints, varnishes and sealants from difficult to reach surfaces
Application
Blending, Surface Preparation
Metal
Ferrous and/or non-ferrous metals
Stainless
Stainless steel, high tensile steel
  • Non-woven material
  • Layered flaps create a thick, cushioned design which provides a nice finish
  • Designed for surface preparation, cleaning, and finishing applications
Application
Grinding, Finishing, Blending
Metal
Ferrous metals
Stainless
Stainless steel, high tensile steel
Aluminum
Non-ferrous metals
  • Combines coated and non-woven abrasives which allows you to "Grind & Finish" with one product reducing time and labor
  • Cushioned grinding effect allows for effortless blending and finishing of contoured work pieces
  • Aluminum oxide specifications available in coarse, medium, and very fine
  • Ceramic specification (High Performance) available in 40 grit and 60 grit - provides exceptionally long life
Application
Grinding, Finishing, Blending
Metal
Ferrous and/or non-ferrous metals
Stainless
Stainless steel, high tensile steel, titanium
Aluminum
Non-ferrous metals
  • Interleaf flap wheels are constructed with alternating flaps of surface conditioning material and coated abrasives material for a high cut rate and a uniform scratch pattern
  • Provides blending action while leaving final finish on work piece
  • Smear-resistant non-woven material for clean, smear-proof work surfaces
  • Interleaf design makes product more aggressive than SAIT non-woven flap brushes and less aggressive than SAIT coated abrasive flap wheels
  • Available in two grades: Medium and Very Fine
Application
Finishing
Aluminum
Aluminum
Stainless
Stainless steel
Metal
Ferrous and non-ferrous materials
Wood
Fiberglass
  • For use with right angle grinders utilizing fiber disc backing pads
  • High durability with superior edge retention and minimal smearing
  • For aggressive applications where traditional surface conditioning products fail
  • Ideal for highly contoured surfaces, heavy blending and finishing and sharp edges
Application
Deburring, Cleaning
Stainless
Stainless steel
Metal
Ferrous and/or non-ferrous metals
Wood
Fiberglass, gaskets
  • Capable of conforming to concave, flat, and irregular surfaces
  • Creates matte and satin finishes without lines on work piece
  • Excellent for blending, cleaning welds, and removing corrosion, rust, or scaling
  • Excellent for grain, antique, and satin finishes, finishing aluminum extrusions, and applying an inline brushed finish on aluminum and stainless steel
Application
Finishing
Aluminum
Aluminum, brass
Stainless
Stainless steel
  • Nylon Screw threaded hub for easy mounting to the backing pad
  • High durability with superior edge retention and minimal smearing
  • For aggressive applications where traditional surface conditioning products fail
  • Ideal for highly contoured surfaces, heavy blending and finishing and sharp edges
Application
Deburring, Cleaning
Stainless
Stainless steel
Metal
Ferrous and/or non-ferrous metals
Wood
Fiberglass, gaskets
  • Capable of conforming to concave, flat and irregular surfaces
  • Excellent for blending, cleaning welds and removing corrosion, rust, or scaling
  • Excellent for grain, antique, matte and satin finishes, finishing aluminum extrusions and applying an inline brushed finish on aluminum and stainless steel
  • Available in slotted keyway arbor or with 5/8-11 for use on a wide variety of portable finishing machines
Application
Finishing, Blending, Surface Preparation, Linear Finishing
Aluminum
Aluminum, brass
Stainless
Stainless steel
  • Capable of conforming to concave, flat and irregular surfaces
  • Excellent for blending, cleaning welds and removing corrosion, rust, or scaling
  • Excellent for grain, antique, matte and satin finishes, finishing aluminum extrusions and applying an inline brushed finish on aluminum and stainless steel
  • Available in slotted keyway arbor or with 5/8-11 for use on a wide variety of portable finishing machines
Application
Finishing, Blending, Surface Preparation, Linear Finishing
Aluminum
Aluminum, brass
Stainless
Stainless steel
  • Capable of conforming to concave, flat, and irregular surfaces
  • Creates matte and satin finishes without lines on work piece
  • Excellent for blending, cleaning welds, and removing corrosion, rust or scaling
  • Excellent for grain, antique, and satin finishes, finishing aluminum extrusions, and applying an inline brushed finish on aluminum and stainless steel
Application
Finishing, Surface Preparation
Aluminum
Aluminum, brass
Stainless
Stainless steel
  • Premium quality buffing material
  • Designed for final cosmetic finishing
  • Available in Hook & Loop and Sait-Lok™-R
  • A slower speed achieves a better finish and reduces heat
Application
Finishing
Stainless
Stainless steel and other high tensile alloys
Aluminum
Aluminum, brass and other non-ferrous metals
  • Nylon Screw threaded hub for easy mounting to the backing pad
  • Used in a wide variety of applications including cleaning, polishing, blending and deburring
  • Non-woven synthetic fiber coated with aluminum oxide grain, resists loading for long life without damage to or removal of base material
Application
Deburring, Cleaning
Stainless
Stainless steel
Metal
Ferrous and/or non-ferrous metals
Wood
Fiberglass, gaskets
  • Arbor hole for easy mounting to grinder shaft
  • For minor finishing and blending applications
  • Less aggressive cutting than traditional surface conditioning discs
  • Great for final finishing prior to buffing with compounds
  • Use the slowest speed possible for optimum results
Application
Finishing, Blending
Aluminum
Aluminum
Stainless
Stainless steel
Metal
Ferrous and non-ferrous materials
  • Nylon attachment on disc ensures a secure fit to the backing pad
  • Used in a wide variety of applications including cleaning, polishing, blending and deburring
  • Non-woven synthetic fiber coated with aluminum oxide grain, resists loading for long life without damage to or removal of base material
Application
Deburring, Cleaning
Stainless
Stainless steel
Metal
Ferrous and/or non-ferrous metals
Wood
Fiberglass, gaskets
  • Nylon attachment on disc ensures a secure fit to the backing pad
  • For minor finishing and blending applications
  • Less aggressive cutting than traditional surface conditioning discs
  • Great for final finishing prior to buffing with compounds
  • Use the slowest speed possible for optimum results
Application
Finishing, Blending
Aluminum
Aluminum
Stainless
Stainless steel
Metal
Ferrous and non-ferrous materials
  • Non-woven synthetic fiber impregnated with abrasive grain for surface conditioning without damage to or removal of base material. Resists loading and heat build-up
  • Offered in very narrow widths for use on tight radii and hard to reach applications
  • Flexible yet extra durable splice method for resistance to breaking or cracking under severe stress
Application
Finishing, Blending, Cleaning, Surface Preparation
Stainless
Stainless steel
Metal
Ferrous metals
Aluminum
Non-ferrous metals
Wood
Fiberglass and rubber
  • Hook & Loop fastening system allows for quick changes and less downtime
  • For minor finishing and blending applications
  • Less aggressive cutting than traditional surface conditioning discs
  • Great for final finishing prior to buffing with compounds
  • Use the slowest speed possible for optimum results
Application
Finishing, Blending
Aluminum
Aluminum
Stainless
Stainless steel
Metal
Ferrous and non-ferrous materials
  • Non-woven synthetic fiber impregnated with abrasive grain for surface conditioning without damage to or removal of base material. Resists loading and build-up
  • Wet/dry construction for use in a wide range of applications
  • Available in a variety of grades from heavy duty to polishing applications
  • Reusable and long lasting design for economical use
  • Box label UPC bar coded for easy identification and inventory maintenance
Application
Finishing, Surface Preparation
Metal
Ferrous metals
Aluminum
Non-ferrous metals
Wood
Wood
  • Re-usable reducing bushings for use with Convolute Wheels
  • Packaged per pair
  • For manual use with non-woven 6" x 9" hand pads
  • For more uniform finish when hand sanding
  • For use with Hook & Loop style Sand-Light™ and Surface Conditioning Discs
  • 1/4" shank pads
  • Threaded pads available for dual action random orbital sanders and right angle grinder/sander
  • For use with buffing discs
  • Available in 5" & 7" with 5/8-11 thread
  • Black Bar: Used to buff contaminants out prior to finishing. Will remove rust, stains, scale, and other contaminants. An extremely fast cutting material. Also called emery cake.
  • Brown Bar: Used for buffing aluminum, brass, copper, wood, plastics, hard rubber, and painted surfaces. Also called Tripoli rouge.
  • Red Bar: For buffing precious metals like gold, silver, platinum, sterling, and other high end metals. Can also be sued to further enhance materials that have already been buffed with other compounds. The finest grade.
  • White Bar: Used for buffing stainless steel, carbon steel, nickel, aluminum, and chromium to a high luster shine.
  • Celeste/Light Blue: Fine grade abrasive compound for polishing and mirror finishing of stainless steel and aluminum
  • Blu/Blue: Medium grade abrasive compound for polishing and finishing of stainless steel and aluminum
  • Special aluminum oxide formulation prevents "loading" on soft (non-ferrous) metals
  • Soft bond for aggressive removal of material without loading
  • Outlasts competition by as much as 40%
  • Type 27
Application
Grinding
Aluminum
Non-ferrous metals (aluminum, copper, brass, etc.)
  • Hard bond for long life grinding with fast stock removal
  • High performance, ceramic aluminum oxide grain, is designed to outlast standard aluminum oxide wheels
  • Very uniform, high density grain structure is extremely durable and self sharpening for long life and cooler cut
  • Type 27
Application
Grinding
Stainless
Stainless steel and other high tensile alloys
Metal
Ferrous metals (iron, steel, welds, etc.)
  • Specially formulated for nuclear and food processing plants where the need for contaminant-free stock removal on stainless steel is a concern
  • Free of iron, chlorine and sulphur compounds (Fe + Cl + S < 0.1%)
  • Type 27
Application
Grinding
Stainless
Stainless steel and other high tensile alloys
Metal
Ferrous metals (iron, steel, welds, etc.)
  • Proprietary grain and bond system
  • Premium performance for severe edge grinding
  • Type 27
Application
Grinding
Metal
Ferrous Metals (iron, steel, welds, etc.)
Stainless
Stainless steel, high tensile alloys
  • Aluminum oxide grain
  • Hard bond designed for edge and bevel grinding and other applications where a harder wheel is preferred
  • Longer life for fewer wheel changes
  • Type 27
Application
Grinding
Metal
Ferrous Metals (iron, steel, welds, etc.)
  • Our most popular wheel
  • Aluminum oxide grain
  • For general purpose grinding
  • Longer life for fewer wheel changes
  • Type 27
Application
Grinding
Metal
Ferrous Metals (iron, steel, welds, etc.)
  • Aluminum oxide grain
  • Soft bond for fast stock removal
  • Type 27
Application
Grinding
Metal
Ferrous Metals (iron, steel, welds, etc.)
Stainless
Low grade stainless steel
  • Soft bond for extremely fast stock removal on hard metals with minimal pressure
  • High performance, ceramic aluminum oxide grain, is designed to outlast standard aluminum oxide wheels
  • Very uniform, high density grain structure is extremely durable and self sharpening for long life and cooler cut
  • Type 27
Application
Grinding
Stainless
Stainless steel and other high tensile alloys
Metal
Ferrous metals (iron, steel, welds, etc.)
  • Our best choice for maximum stock removal
  • Premium high ratio ceramic grain for increased efficiency and performance
  • Type 27
Application
Grinding
Metal
Ferrous Metals (iron, steel, welds, etc.)
Stainless
Stainless steel, high tensile alloys
  • Special silicon carbide grain formula is excellent for grinding masonry, concrete, stone and aggregate
  • Use the C24N wheel on hard to grind metal like cast iron and carbide
  • Soft bond for fast stock removal
  • Type 27
Application
Grinding
Concrete
Masonry, concrete, stone
Metal
Cast iron and other ferrous metals, carbide
  • Tough zirconium grain
  • High performance grinding for the toughest applications
  • Type 27
Application
Grinding
Metal
Ferrous Metals (iron, steel, welds, etc.)
Stainless
Stainless steel, high tensile alloys
  • High performance, ceramic aluminum oxide grain
  • Very uniform, high density grain structure is extremely durable and self sharpening for long life and cooler cut
  • Combines maximum material removal with long life
  • Use this saucer shape (Type 28) for uniform grinding of large flat surfaces
  • Type 28
Application
Grinding
Stainless
Stainless steel
Metal
Ferrous metals (iron, steel, welds, etc.)
  • Aluminum oxide grain
  • Medium bond for longer life and fewer wheel changes
  • Use this saucer shape (Type 28) for uniform grinding of large flat surfaces
  • Type 28
Application
Grinding
Metal
Ferrous Metals (iron, steel, welds, etc.)
  • Aluminum oxide grain
  • Soft bond for fast stock removal
  • Use this saucer shape (Type 28) for uniform grinding of large flat surfaces
  • Type 28
Application
Grinding
Metal
Ferrous Metals (iron, steel, welds, etc.)
Stainless
Low-grade stainless steel
  • Fast, burr free cutting on: Thin metals, metal studs, duct work, sheet metals, galvanized roofing, thin walled pipe, conduit, strut channel
  • Cool cutting action with long life
Application
Cutting
Metal
Thin metals, metal studs, duct work, sheet metals, galvanized roofing, thin walled pipe, conduit, strut channel
  • Cool cutting action for minimal discoloration
  • Fast, burr free cutting
Application
Cutting
Stainless
Tubing, bars, pipe, and stainless steel plates
  • Cool cutting action with long life and minimal melting of aluminum
  • Fast, burr free cutting
Application
Cutting
Aluminum
Aluminum, other non-ferrous metals and pipe
  • Designed for cutting concrete with rebar and other concrete applications
  • Features 12mm segments for longer blade life
Application
Cutting
Concrete
Cured concrete, brick, concrete block and pavers
  • Designed for cutting concrete, green concrete, brick, concrete block, paver and asphalt
  • Features 10mm segments with deep segment/ undercut protection for long life and non-binding cutting
Application
Cutting
Concrete
Cured concrete, green concrete, brick, concrete block, pavers and asphalt
  • Fast, burr free cutting on heavier gauge metals
  • Cool cutting action with long life
Application
Cutting
Metal
Angle iron, rebar, steel plate, channel iron, pipe, threaded rod, c-channel and other ferrous metals
  • Thin .060 for precise tile cutting
  • Continuous uniform rim for smooth, dry and wet cutting of tiles and ceramic materials
  • Longer lasting and faster cutting
  • For use on small diameter electric saws
Application
Cutting
Tile
Ceramic
  • Continuous rim with alternating serrations for fast, cool cutting wet or dry
  • Smooth cutting of almost any aggregate material
  • For use on small diameter electric saws
  • CE Premium: General purpose cutting
  • CC Premium +: Longer lasting and faster cutting premium wheel
Application
Cutting
Concrete
Concrete, ceramic, granite, brick, blocks, marble
  • Segmented rim allows for a cool cut
  • Laser welded bonded to the metal core for cutting wet or dry
  • LU Premium: General purpose dry cutting
  • LV Premium +: Longer lasting and faster dry cutting premium wheel
Application
Cutting
Concrete
Concrete, ceramic, granite, brick, blocks, marble
  • Aluminum oxide grain
  • General purpose, long life
Application
Cutting
Metal
Ferrous metals (iron, steel, welds, etc.)
  • Aluminum oxide grain
  • Hard bond for aggressive cutting on rough applications
Application
Cutting
Metal
Ferrous metals (iron, steel, welds, etc.)
Stainless
Stainless steel
  • Hard bond for smooth cutting
  • For use in nuclear, aerospace, automotive, foundry industries, and plant maintenance
Application
Cutting
Metal
Ferrous metals (iron, steel, welds, etc.)
Stainless
High tensile metals
  • High performance, ceramic aluminum oxide grain
  • Very uniform, high density grain structure is extremely durable and self sharpening for long life and cooler cut
  • High Performance
  • Combines fast cutting with extremely long life
Application
Cutting
Stainless
Stainless steel, high tensile alloys
Metal
Ferrous and/or non-ferrous metals
  • Zirconia alumina abrasive material
  • H-weight, waterproof polyester backing for heavy duty grinding and finishing
  • Heavy Duty
  • Each package of belts is shrink-wrapped in quantities of 10
Application
Grinding, Finishing
Stainless
Stainless steel, high tensile alloys
Metal
Ferrous and/or non-ferrous metals, cast iron
Aluminum
Aluminum
  • Zirconia alumina abrasive material
  • H-weight, waterproof polyester backing for heavy duty grinding and finishing
  • Heavy Duty
  • Each package of belts is shrink-wrapped in quantities of 10
Application
Grinding, Finishing
Stainless
Stainless steel, high tensile alloys
Metal
Ferrous and/or non-ferrous metals, cast iron
Aluminum
Aluminum
  • Zirconia alumina abrasive material
  • H-weight, waterproof polyester backing for heavy duty grinding and finishing
  • Heavy Duty
  • Specially designed boxes lend themselves to being displayed - either on pegboard hooks or shelving
Application
Grinding, Finishing
Stainless
Stainless steel, high tensile alloys
Metal
Ferrous and/or non-ferrous metals, cast iron
Aluminum
Aluminum
  • Zirconia alumina abrasive material
  • H-weight, waterproof polyester backing for heavy duty grinding and finishing
  • Heavy Duty
  • Each package of belts is shrink-wrapped in quantities of 10
Application
Grinding, Finishing
Stainless
Stainless steel, high tensile alloys
Metal
Ferrous and/or non-ferrous metals, cast iron
Aluminum
Aluminum
  • Semi-friable aluminum oxide grain
  • X-weight cotton backing
  • For general purpose, open coat grinding, polishing and finishing of materials that have a tendency to load
  • Each package of belts is shrink-wrapped in quantities of 10
Application
Grinding, Finishing
Metal
Ferrous and/or non-ferrous metals, cast iron
Aluminum
Aluminum
Wood
Soft and/or hard woods
  • Semi-friable aluminum oxide grain
  • X-weight cotton backing
  • For general purpose, open coat grinding, polishing and finishing of materials that have a tendency to load
  • Specially designed boxes lend themselves to being displayed - either on pegboard hooks or shelving
Application
Grinding, Finishing
Metal
Ferrous and/or non-ferrous metals, cast iron
Aluminum
Aluminum
Wood
Soft and/or hard woods
  • High performance ceramic aluminum oxide grain
  • Grinding aids for reduced heat and decreased loading
  • Excels on heat sensitive materials (stainless steel, etc.) and non-ferrous metals (aluminum, etc.) with an exceptional performance and value
  • Each package of belts is shrink-wrapped in quantities of 10
Application
Grinding, Finishing
Stainless
Stainless steel, high tensile alloys, titanium
Metal
Carbon steel, cast iron
Aluminum
Non-ferrous metals (Aluminum, copper, brass, etc.)
  • High performance ceramic aluminum oxide grain
  • Grinding aids for reduced heat and decreased loading
  • Excels on heat sensitive materials (stainless steel, etc.) and non-ferrous metals (aluminum, etc.) with an exceptional performance and value
  • Each package of belts is shrink-wrapped in quantities of 10
Application
Grinding, Finishing
Stainless
Stainless steel, high tensile alloys, titanium
Metal
Carbon steel, cast iron
Aluminum
Non-ferrous metals (Aluminum, copper, brass, etc.)
  • High performance ceramic aluminum oxide grain
  • Grinding aids for reduced heat and decreased loading
  • Excels on heat sensitive materials (stainless steel, etc.) and non-ferrous metals (aluminum, etc.) with an exceptional performance and value
  • Each package of belts is shrink-wrapped in quantities of 10
Application
Grinding, Finishing
Stainless
Stainless steel, high tensile alloys, titanium
Metal
Carbon steel, cast iron
Aluminum
Non-ferrous metals (Aluminum, copper, brass, etc.)
  • High performance ceramic aluminum oxide grain
  • Grinding aids for reduced heat and decreased loading
  • Excels on heat sensitive materials (stainless steel, etc.) and non-ferrous metals (aluminum, etc.) with an exceptional performance and value
  • Each package of belts is shrink-wrapped in quantities of 10
Application
Grinding, Finishing
Stainless
Stainless steel, high tensile alloys, titanium
Metal
Carbon steel, cast iron
Aluminum
Non-ferrous metals (Aluminum, copper, brass, etc.)
  • Premium ceramic grain outlasts conventional zirconium in most applications
  • Cooler cutting and fast, consistent finishes
  • Contaminant Free (Fe + Cl + S < 0.1%)
  • Type 29
Application
Deburring, Welding grinding and blending, Finishing and blending, Contour finishing
Metal
Ferrous and/or non-ferrous metals
Stainless
Stainless steel, high tensile steel, titanium
  • Premium ceramic grain outlasts conventional zirconium in most applications
  • Cooler cutting and fast, consistent finishes
  • Contaminant Free (Fe + Cl + S < 0.1%)
  • Type 27
Application
Deburring, Welding grinding and blending, Finishing and blending, Contour finishing
Metal
Ferrous and/or non-ferrous metals
Stainless
Stainless steel, high tensile steel, titanium
  • Tough zirconium grain provides fast grinding and reliable finishing performance
  • Durable polyester-cotton backing for long life
  • Exceptional value and performance
  • Contaminant Free (Fe + Cl + S < 0.1%)
  • Type 29
Application
Deburring, Welding grinding and blending, Finishing and blending, Contour finishing
Metal
Ferrous and/or non-ferrous metals
Stainless
Stainless steel, high tensile steel, titanium
Aluminum
Non-ferrous metals (aluminum, copper, brass, etc.)
  • Tough zirconium grain provides fast grinding and reliable finishing performance
  • Durable polyester-cotton backing for long life
  • Exceptional value and performance
  • Contaminant Free (Fe + Cl + S < 0.1%)
  • Type 27
Application
Deburring, Welding grinding and blending, Finishing and blending, Contour finishing
Metal
Ferrous and/or non-ferrous metals
Stainless
Stainless steel, high tensile steel, titanium
Aluminum
Non-ferrous metals (aluminum, copper, brass, etc.)
  • Premium ceramic grain outlasts conventional zirconium in most applications
  • Cooler cutting and fast, consistent finishes
  • High density flap discs contain approximately 40% more material than conventional, regular density flap discs
  • Contaminant Free (Fe + Cl + S < 0.1%)
  • Type 27
Application
Deburring, Welding grinding and blending, Finishing and blending, Contour finishing
Metal
Ferrous and/or non-ferrous metals
Stainless
Stainless steel, high tensile steel, titanium
  • High performance zirconium grain for a wide variety of grinding and finishing applications
  • Provides long life while maintaining high stock removal rates
  • High density flap discs contain approximately 40% more material than conventional, regular density flap discs
  • Contaminant Free (Fe + Cl + S < 0.1%)
  • Type 27
Application
Deburring, Welding grinding and blending, Finishing and blending, Contour finishing
Stainless
Stainless steel, high tensile steel, titanium
Metal
Ferrous Metals
Aluminum
Non-ferrous metals (aluminum, copper, brass, etc.)
  • Heavy duty zirconium grain, designed for high pressure applications
  • Durable polyester backing for reduced edge wear and long life
  • High density flap discs contain approximately 40% more material than conventional, regular density flap discs
  • Contaminant Free (Fe + Cl + S < 0.1%)
  • Type 27
Application
Deburring, Welding grinding and blending, Finishing and blending, Contour finishing
Metal
Ferrous and/or non-ferrous metals
Stainless
Stainless steel, high tensile steel, titanium
  • Premium ceramic grain outlasts conventional zirconium in most applications
  • Cooler cutting and fast, consistent finishes
  • Contaminant Free (Fe + Cl + S < 0.1%)
  • Type 29
Application
Deburring, Welding grinding and blending, Finishing and blending, Contour finishing
Metal
Ferrous and/or non-ferrous metals
Stainless
Stainless steel, high tensile steel, titanium
  • Premium ceramic grain outlasts conventional zirconium in most applications
  • Cooler cutting and fast, consistent finishes
  • Contaminant Free (Fe + Cl + S < 0.1%)
  • Type 27
Application
Deburring, Welding grinding and blending, Finishing and blending, Contour finishing
Metal
Ferrous and/or non-ferrous metals
Stainless
Stainless steel, high tensile steel, titanium
  • Tough zirconium grain provides fast grinding and reliable finishing performance
  • Durable cotton backing for long life
  • Exceptional value and performance
  • Contaminant Free (Fe + Cl + S < 0.1%)
  • Type 29
Application
Deburring, Welding grinding and blending, Finishing and blending, Contour finishing
Metal
Ferrous and/or non-ferrous metals
Stainless
Stainless steel, high tensile steel, titanium
Aluminum
Non-ferrous metals (aluminum, copper, brass, etc.)
  • Tough zirconium grain provides fast grinding and reliable finishing performance
  • Durable cotton backing for long life
  • Exceptional value and performance
  • Contaminant Free (Fe + Cl + S < 0.1%)
  • Type 27
Application
Deburring, Welding grinding and blending, Finishing and blending, Contour finishing
Metal
Ferrous and/or non-ferrous metals
Stainless
Stainless steel, high tensile steel, titanium
Aluminum
Non-ferrous metals (aluminum, copper, brass, etc.)
  • Premium aluminum oxide with grinding aid for grinding and finishing on stainless steel with minimal discoloration
  • Works great on aluminum and non-ferrous materials with minimal loading
  • Provides long life while maintaining high stock removal rates
  • High density flap discs contain approximately 40% more material than conventional, regular density flap discs
  • Type 27
Application
Deburring, Welding grinding and blending, Finishing and blending, Contour finishing
Stainless
Stainless steel, high tensile steel, titanium
Aluminum
Non-ferrous metals (aluminum, copper, brass, etc.)
  • Premium ceramic grain outlasts conventional zirconium in most applications
  • Cooler cutting and fast, consistent finishes
  • High density flap discs contain approximately 40% more material than conventional, regular density flap discs
  • Contaminant Free (Fe + Cl + S < 0.1%)
  • Type 27
Application
Deburring, Welding grinding and blending, Finishing and blending, Contour finishing
Metal
Ferrous and/or non-ferrous metals
Stainless
Stainless steel, high tensile steel, titanium
  • High performance zirconium grain for a wide variety of grinding and finishing applications
  • Provides long life while maintaining high stock removal rates
  • High density flap discs contain approximately 40% more material than conventional, regular density flap discs
  • Contaminant Free (Fe + Cl + S < 0.1%)
  • Type 27
Application
Deburring, Welding grinding and blending, Finishing and blending, Contour finishing
Stainless
Stainless steel, high tensile steel, titanium
Metal
Ferrous Metals
Aluminum
Non-ferrous metals (aluminum, copper, brass, etc.)
  • Heavy duty zirconium grain, designed for high pressure applications
  • Durable polyester backing for reduced edge wear and long life
  • High density flap discs contain approximately 40% more material than conventional, regular density flap discs
  • Contaminant Free (Fe + Cl + S < 0.1%)
  • Type 27
Application
Deburring, Welding grinding and blending, Finishing and blending, Contour finishing
Metal
Ferrous and/or non-ferrous metals
Stainless
Stainless steel, high tensile steel, titanium
  • Semi-friable (1A-X) / heat treated (2A-X) aluminum oxide grain
  • X-weight cotton backing
  • For general purpose grinding and finishing
  • Each package of belts is shrink-wrapped in quantities of 10
Application
Grinding, Finishing, Sanding
Metal
Ferrous and/or non-ferrous metals, cast iron
Stainless
Stainless steel, high tensile alloys
Aluminum
Aluminum
Wood
Soft and/or hard woods
  • Semi-friable (1A-X) / heat treated (2A-X) aluminum oxide grain
  • X-weight cotton backing
  • For general purpose grinding and finishing
  • Each package of belts is shrink-wrapped in quantities of 10
Application
Grinding, Finishing, Sanding
Metal
Ferrous and/or non-ferrous metals, cast iron
Stainless
Stainless steel, high tensile alloys
Aluminum
Aluminum
Wood
Soft and/or hard woods
  • Semi-friable (1A-X) / heat treated (2A-X) aluminum oxide grain
  • X-weight cotton backing
  • For general purpose grinding and finishing
  • Specially designed boxes lend themselves to being displayed - either on pegboard hooks or shelving
Application
Grinding, Finishing, Sanding
Metal
Ferrous and/or non-ferrous metals, cast iron
Stainless
Stainless steel, high tensile alloys
Aluminum
Aluminum
Wood
Soft and/or hard woods
  • Semi-friable (1A-X) / heat treated (2A-X) aluminum oxide grain
  • X-weight cotton backing
  • For general purpose grinding and finishing
  • Each package of belts is shrink-wrapped in quantities of 10
Application
Grinding, Finishing, Sanding
Metal
Ferrous and/or non-ferrous metals, cast iron
Stainless
Stainless steel, high tensile alloys
Aluminum
Aluminum
Wood
Soft and/or hard woods
  • Economy aluminum oxide, closed coat
  • X-weight cotton backing
  • For low cost sanding and finishing of ordinary and alloyed steels, ferrous and non ferrous metals, cast iron and wood
  • A good choice where price and best value is the determining factor
  • Each package of belts is shrink-wrapped in quantities of 10
Application
Grinding, Finishing
Metal
Ferrous and/or non-ferrous metals, cast iron
Stainless
Stainless steel, high tensile alloys
Aluminum
Aluminum
Wood
Soft and/or hard woods
  • Economy aluminum oxide, closed coat
  • X-weight cotton backing
  • For low cost sanding and finishing of ordinary and alloyed steels, ferrous and non ferrous metals, cast iron and wood
  • A good choice where price and best value is the determining factor
  • Each package of belts is shrink-wrapped in quantities of 10
Application
Finishing, Sanding
Metal
Ferrous and/or non-ferrous metals, cast iron
Stainless
Stainless steel, high tensile alloys
Aluminum
Aluminum
Wood
Soft and/or hard woods
  • Aluminum oxide grain
  • Fast stock removal
  • Excellent edge grain retention
  • Triple laminated construction for severe pressure applications where conventional laminated discs have too much flex
  • Excellent for edge grinding, deburring, and weld preparation and removal
Application
Grinding, Blending
Metal
Ferrous and/or non-ferrous metals
Wood
Wood, plastic, fiberglass, etc.
  • Premium zirconium grain with grinding aid
  • Cooling agents for cool cutting and long life
  • Very fast stock removal, no discoloration
  • Easy disc changes by twisting to unlock backing pad
Application
Grinding, Blending
Stainless
Stainless steel, high tensile alloys
Metal
Ferrous and/or non-ferrous metals
  • Premium Zirconium grain with grinding aid to reduce heat build up and minimize loading
  • Closed coat structure for very aggressive material removal and long life
  • Excels on stainless steel, high tensile steel, titanium and aluminum
  • Available in Bulk, Blue Line™ or Sait-lok™ Packaging
Application
Grinding, Blending
Stainless
Stainless steel, high tensile alloys, titanium
Metal
Ferrous metals
Aluminum
Non-ferrous metals (aluminum, copper, brass, etc.)
  • For use on standard 4-1/2" and 5" angle grinders
  • Applies a linear scratch pattern, instead of a swirl; narrow profile is excellent for cleaning weld beads
  • Suitable for surface preparation, paint and rust removal, cleaning, and finishing
  • Increases the versatility of your angle grinder
Application
Finishing
Stainless
Stainless steel, high tensile steel, titanium
Metal
Ferrous metals
Aluminum
Non-ferrous metals
  • More open aggressive cut to avoid loading on softer materials
  • This design provides outstanding stock removal on aluminum, magnesium, copper, soft steel, brass, zinc alloys, hard rubber, most plastics, and non-ferrous metals.
  • Easy chip flow with little or no clogging
  • Excellent for confined or hard-to-reach areas
  • Use for deburring, finishing, shaping and enlarging holes, removing welds, and smoothing castings
Application
Grinding, Finishing, Deburring
Aluminum
Non-ferrous metals (aluminum, copper, brass, etc)
  • Our highest performing disc for carbon steel
  • High density ceramic grain for maximum performance
  • Available in Bulk or Sait-lok™ Packaging
Application
Grinding, Blending
Metal
Carbon steel, cast iron
  • Excels on heat sensitive materials (stainless steel, etc.) and non-ferrous metals (aluminum, etc.) with an exceptional performance and value
  • High performance, ceramic aluminum oxide grain
  • Grinding aids for reduced heat and decreased loading
  • Easy disc changes by twisting to unlock backing pad
  • Features unique composite Sait-Lok™ hub for added strength
Application
Grinding, Blending
Stainless
Stainless steel, high tensile alloys, titanium
Metal
Carbon steel, Cast Iron
Aluminum
Non-ferrous metals (aluminum, copper, brass, etc.)
  • For aggressive sanding, preparation, and stock removal
  • Aluminum oxide grain for material removal, long life and finishing
  • E-weight paper reduces torn edges which produce deep, uneven random scratches
  • Available with Hook & Loop Backing or PSA Backing
Application
Finishing, Surface Preparation
Wood
Wood, auto body applications, and fiberglass
Metal
Ferrous and non-ferrous metals
  • Extremely long lasting
  • Open coat structure prevents loading
  • Use wet or dry
  • C-weight paper backing - medium weight, medium flexibility
  • D-weight paper backing - heavy weight, low flexibility
Application
Hand Sanding, Sanding
Wood
Wood, sealers, fillers
Metal
Ferrous and/or non-ferrous metals
  • Aluminum oxide grain on a flexible cloth backing
  • Open coat structure prevents loading
  • Water resistant
  • Long life combined with excellent stock removal, excellent for woodworking applications
  • F-weight cloth backing - high flexibility
Application
Hand Sanding, Sanding
Wood
Wood, paint, fiberglass
Metal
Ferrous and/or non-ferrous materials (iron, steel, copper, etc.)
  • Aluminum oxide grain
  • Open coat structure prevents loading
  • For wet or dry hand operations
Application
Cleaning, Surface Preparation
Wood
Wood, paint, etc.
Paint
Body filler, paint, primers
Metal
Ferrous and/or non-ferrous metals
  • Zirconium/ Aluminum Oxide blend
  • Excellent, economical choice
  • Fast grinding
  • Available in Bulk or Blue Line™ Packaging
Application
Grinding, Blending
Stainless
Stainless steel, high tensile alloys
Metal
Ferrous and/or non-ferrous metals (iron, steel, welds, etc.)
  • Premium Silicon Carbide grain on a tough paper backing
  • Designed for fine finishing and long life
  • Available with Hook & Loop Backing
Application
Finishing
Concrete
Marble, granite, solid surface, ceramics, concrete, plastic
Metal
ferrous and non-ferrous metals
  • Semi-Flexible
  • Grind and blend welds in one step
  • Open pattern on wheel for cool grinding and blending
  • Contaminant Free - Safe for use in the nuclear industry
  • Requires no backing pad
Application
Grinding, Blending
Stainless
Stainless steel
Metal
Steel, iron, bronze
Aluminum
Non-ferrous metals (aluminum, copper, brass, etc.)
  • Semi-Flexible
  • Grind and blend welds in one step
  • Open pattern on wheel for cool grinding and blending
  • Contaminant Free - Safe for use in the nuclear industry
  • Requires no backing pad
Application
Grinding, Blending
Stainless
Stainless steel, high tensile alloys
Metal
Steel, iron, bronze, mill scale
Aluminum
Non-ferrous metals (aluminum, copper, brass, etc.)
  • Aluminum oxide grain
  • Open pattern on wheel for cool grinding and blending
  • Contaminant Free - Safe for use in the nuclear industry
  • Use for longer life in aggressive applications
  • Must be used with backing pad (one included in each box)
Application
Grinding, Blending
Metal
Steel, iron, bronze
Stainless
Stainless steel
Aluminum
Non-ferrous metals (aluminum, copper, brass, etc.)
Concrete
Masonry, plastic, fiberglass
  • Premium quality EA-F material for very high flexibility used in industrial rolls
  • Open coat structure prevents loading
  • Can be slit up to 3 cuts, 3" minimum width. Specify when ordering
Application
Hand Sanding, Sanding
Metal
Ferrous and/or non-ferrous metals
Wood
Wood, fiberglass, etc.
  • Economical, general purpose paper sheet
  • Extra open coat structure prevents loading
  • Good flexibility, yet durable backing
  • D-weight paper backing - heavy weight, low flexibility
Application
Hand Sanding, Sanding
Wood
Wood, sealers, paint, fillers, plastic materials
  • Aluminum oxide grain
  • General purpose economy cutting
  • Fast cutting on thin metals
  • An economical alternative for general purpose cutting
Application
Cutting
Metal
Metal studding, thin rebar, light gauge and heavy metals
  • Aluminum oxide grain
  • General purpose cool cutting on thin metals
  • Burr-free finish
  • Externally reinforced with the highest quality fiberglass to withstand the toughest applications
  • An economical alternative for general purpose cutting
Application
Cutting
Metal
Metal studding, thin rebar, light gauge and heavy metals
  • Aluminum oxide grain
  • High quality DA-F material for high flexibility
  • Medium tensile strength
  • Primarily for hand applications
Application
Hand Sanding, Sanding
Metal
Ferrous and/or non-ferrous metals
Wood
Wood, fiberglass, etc.
  • Aluminum oxide grain
  • Premium quality EA-F material for very high flexibility
  • High tensile strength, extra durable backing
  • Long life
  • Primarily for machine applications
Application
Hand Sanding, Sanding
Metal
Ferrous and/or non-ferrous metals
Wood
Wood, fiberglass, etc.
  • Aluminum oxide grain
  • High quality DA-F material for high flexibility
  • Medium tensile strength
  • Primarily for hand applications
Application
Hand Sanding, Sanding
Metal
Ferrous and/or non-ferrous metals
Wood
Wood, fiberglass, etc.
  • More open aggressive cut to avoid loading on softer materials
  • This design provides outstanding stock removal on aluminum, magnesium, copper, soft steel, brass, zinc alloys, hard rubber, most plastics, and non-ferrous metals.
  • Easy chip flow with little or no clogging
  • Excellent for confined or hard-to-reach areas
  • Use for deburring, finishing, shaping and enlarging holes, removing welds, and smoothing castings
Application
Grinding, Finishing, Deburring
Aluminum
Non-ferrous metals (aluminum, copper, brass, etc)
  • Tough zirconium grain
  • High performance cutting and light grinding for the toughest applications
  • Ideal for root pass grinding
  • Type 27
Application
Cutting, Light Grinding
Metal
Ferrous metals (iron, steel, welds)
Stainless
Stainless steel, high tensile alloys
  • Long-life, non-loading sanding
  • Packaged in smaller, easier to sell quantities
  • Specifically designed for customers desiring more consumer-oriented packaging: skilled craftsmen, professional tradesmen, MRO engineers, fabricators, and the knowledgeable do-it-yourselfers
  • Available in All Purpose Aluminum Oxide Sheets and Waterproof Silicon Carbide Sheets
Application
Hand Sanding, Sanding
Wood
Body filler, paint, wood and fiberglass
Metal
Ferrous and non-ferrous metals
  • Non-woven material
  • Layered flaps create a thick, cushioned design which provides a nice finish
  • Designed for surface preparation, cleaning, and finishing applications
Application
Grinding, Finishing, Blending
Metal
Ferrous metals
Stainless
Stainless steel, high tensile steel
Aluminum
Non-ferrous metals
  • Nylon threaded hub of disc twists into backing pad for secure fit
  • For use with SAIT-LOK-R™ laminated and surface conditioning discs, cotton fiber discs and Encore Mini Flap Discs
  • Unique spiral face increases aggressiveness and improves disc life by staying cooler
  • Available in hard density for aggressive cutting action
  • 1/4" shank
  • Disc twists into metal threaded center of backing pad for fast and easy disc change
  • For use with SAIT-LOK™ laminated and surface conditioning discs
  • Unique spiral face increases aggressiveness and improves disc life by staying cooler
  • Available in hard density for aggressive cutting action
  • 1/4" shank
  • Unique spiral face increases aggressiveness and improves disc life by staying cooler
  • For use with SAIT-LOK™ fiber discs
  • Minimizes change-over downtime
  • No additional mounting hardware required
  • Specially designed ABS plastic backing can easily be trimmed away to expose more abrasive material
  • Unique design is ideal for hand rail and fillet weld applications
  • High performance zirconium grain for a wide variety of applications
  • Contaminant Free (Fe + Cl + S < 0.1%)
  • Type 27
Application
Grinding, Finishing, Blending, Deburring
Metal
Ferrous and/or non-ferrous metal
Stainless
Stainless steel, high tensile steel, titanium
Aluminum
Non-ferrous metals (aluminum, copper, brass, etc.)
  • Specially designed ABS plastic backing can easily be trimmed away to expose more abrasive material
  • Unique design is ideal for hand rail and fillet weld applications
  • High performance zirconium grain for a wide variety of applications
  • Contaminant Free (Fe + Cl + S < 0.1%)
  • Type 29
Application
Grinding, Finishing, Blending, Deburring
Metal
Ferrous and/or non-ferrous metal
Stainless
Stainless steel, high tensile steel, titanium
Aluminum
Non-ferrous metals (aluminum, copper, brass, etc.)
  • Premium ceramic grain outlasts conventional zirconium in most applications
  • Specially designed ABS plastic backing can easily be trimmed away to expose more abrasive material
  • Unique design is ideal for hand rail and fillet weld applications
  • Contaminant Free (Fe + Cl + S < 0.1%)
  • Type 27
Application
Grinding, Finishing, Blending, Deburring
Metal
Ferrous and/or non-ferrous metal
Stainless
Stainless steel, high tensile steel, titanium
  • Premium ceramic grain outlasts conventional zirconium in most applications
  • Specially designed ABS plastic backing can easily be trimmed away to expose more abrasive material
  • Unique design is ideal for hand rail and fillet weld applications
  • Contaminant Free (Fe + Cl + S < 0.1%)
  • Type 29
Application
Grinding, Finishing, Blending, Deburring
Metal
Ferrous and/or non-ferrous metal
Stainless
Stainless steel, high tensile steel, titanium
  • Premium aluminum oxide with grinding aid for grinding and finishing on stainless steel with minimal discoloration
  • Works great on aluminum and non-ferrous materials with minimal loading
  • Provides long life while maintaining high stock removal rates
  • Trimmable design allows for easy trimming to expose more material
  • Type 27
Application
Grinding, Finishing, Blending, Deburring
Stainless
Stainless steel, high tensile alloys, titanium
Aluminum
Non-ferrous metals (aluminum, copper, brass, etc.)
  • Premium aluminum oxide with grinding aid for grinding and finishing on stainless steel with minimal discoloration
  • Works great on aluminum and non-ferrous materials with minimal loading
  • Provides long life while maintaining high stock removal rates
  • Trimmable design allows for easy trimming to expose more material
  • Type 29
Application
Grinding, Finishing, Blending, Deburring
Stainless
Stainless steel, high tensile alloys, titanium
Aluminum
Non-ferrous metals (aluminum, copper, brass, etc.)
  • Reusable 5/8-11 adaptor for use on Type 1/ Type 41 and Type 27/ Type 42 reinforced wheels with a 7/8" arbor, a max. diameter of 5" and a wheel thickness of .045 to 1/8"
  • For use with Type 1/ Type 41 Thin High Speed Cut-Off Wheels up to 3" diameter only
  • For use with Type 1/Type 41 cut-off wheels
  • Reduces wheel arbor size
  • Extremely long lasting
  • Closed coat structure for more material removal
  • Use wet or dry
  • C-weight paper backing - medium weight, medium flexibility
Application
Hand Sanding, Sanding
Wood
Varnish, plastic, fiberglass, clear coat, primer
Concrete
Marble, ceramics
Metal
Ferrous and/or non-ferrous metals
  • Premium Zirconium grain, closed coat structure
  • Good for aggressive stock removal and long life on a variety of materials
  • Available in Bulk, Blue Line™ or Sait-lok™ Packaging
Application
Grinding, Blending
Stainless
Stainless steel, high tensile alloys
Metal
Ferrous and/or non-ferrous metals (iron, steel, welds, etc.)
  • Premium zirconium grain
  • Very fast stock removal, long life
  • Easy disc changes by twisting to unlock backing pad
Application
Grinding, Blending
Stainless
Stainless steel, high tensile alloys
Metal
Ferrous and/or non-ferrous metals (iron, steel, welds, etc.)
  • Best choice for aggressive sanding, preparation, and stock removal
  • Zirconium grain for aggressive material removal and long life
  • Heavy, F-weight paper prevents torn edges which produce deep, uneven random scratches
  • Available with Hook & Loop Backing or PSA Backing
Application
Finishing, Surface Preparation
Metal
Ferrous and non-ferrous metals
Wood
Wood
  • High performance zirconium grain
  • Extremely fast stock removal and long life
  • Triple laminated construction for severe pressure applications where conventional laminated discs have too much flex
  • Excellent for edge grinding, deburring, and weld preparation and removal
Application
Grinding, Blending
Metal
Ferrous and/or non-ferrous metals
Stainless
Stainless steel, high tensile alloys
  • Tough zirconium grain
  • High performance cutting for the toughest applications
Application
Cutting
Metal
Ferrous metals (iron, steel, welds, etc.)
Stainless
Stainless steel, high tensile alloys
  • Special zirconium grain formula
  • Hard bond for extremely long life
  • Fast, burr-free cutting
Application
Cutting
Metal
Ferrous and/or non-ferrous metals (iron, steel, welds, etc.)
Stainless
Stainless steel, high tensile alloys
  • Special zirconium grain formula
  • Hard bond for extremely long life
  • Fast, burr-free cutting
Application
Cutting
Metal
Ferrous and/or non-ferrous metals (iron, steel, welds, etc.)
Stainless
Stainless steel, high tensile alloys
  • Thin .090 width
  • Tough zirconium grain
  • High performance cutting and notching for the toughest applications
Application
Cutting, Notching
Metal
Ferrous metals (iron, steel, welds, etc.)
Stainless
Stainless steel, high tensile alloys
  • Thin .090 width
  • Tough zirconium grain
  • High performance cutting and notching for the toughest applications
Application
Cutting, Notching
Metal
Ferrous metals (iron, steel, welds, etc.)
Stainless
Stainless steel, high tensile alloys
  • Tough zirconium grain
  • High performance cutting, notching, deburring, and light grinding for the toughest applications
Application
Cutting, Light Grinding, Notching, Deburring
Metal
Ferrous metals (iron, steel, welds, etc.)
Stainless
Stainless steel, high tensile alloys
  • Special zirconium grain formula
  • Fast, non-binding cutting
  • Internally reinforced with the highest quality fiberglass to withstand the toughest applications
Application
Cutting
Metal
Ferrous metals
Stainless
Stainless steel, high tensile alloys
  • For use on United Abrasives 1/4-20 threaded flap wheels
  • Facilitates a quick change, thus less downtime
  • High-quality aluminum oxide grain
  • Closed coat structure for more material removal and better finishing
  • General purpose
  • Available in Bulk, Blue Line™ or Sait-lok™ Packaging
Application
Grinding, Blending
Metal
Ferrous and/or non-ferrous metals
Wood
Wood
  • Premium aluminum oxide grain with grinding aid
  • Special aluminum oxide grain to reduce heat build up and minimize loading
  • Closed coat structure for more material removal and better finishing
  • Available in Bulk, Blue Line™ or Sait-lok™ Packaging
Application
Grinding, Blending
Stainless
Stainless steel, high tensile steel, titanium
Metal
Ferrous metals
Aluminum
Non-ferrous metals (aluminum, copper, brass, etc.)
  • Premium aluminum oxide grain with grinding aid
  • Excellent for reducing heat build-up on heat sensitive materials
  • Excellent for cleaning, deburring, polishing, blending
Application
Finishing
Stainless
Stainless steel, high tensile steel, titanium
Aluminum
Non-ferrous metals
Metal
Ferrous metals
  • Premium aluminum oxide grain with grinding aid
  • Excellent for reducing heat build-up on heat sensitive materials
  • Excellent for cleaning, deburring, polishing, blending
Application
Finishing
Stainless
Stainless steel, high tensile steel, titanium
Metal
Ferrous and/or non-ferrous metals
  • Excels on wood and bare metal surfaces
  • Aluminum oxide grain, stearate coating and open coat structure lubricates and prevents loading
  • "C" - medium-weight, average flexibility paper backing
  • For Dry Use Only
  • Available with Hook & Loop Backing or PSA Backing
Application
Finishing
Paint
Body filler, paint, primers
Metal
Ferrous metals
Aluminum
Non-ferrous metals
Wood
Plastics, wood and fiberglass
  • Excels on wood and primed surfaces
  • Our best performing, longest lasting paper disc. Long lasting performance and fast removal rates for fine finishing of auto body, wood, metal, and marine applications
  • Premium aluminum oxide grain, premium Stearate coating and open coat structure lubricates and prevents loading. For Dry Use Only
  • "C" medium-weight, low flexibility paper backing
  • Available with Hook & Loop Backing or PSA Backing
Application
Finishing
Paint
Body filler, paint, primers
Metal
Ferrous metals
Aluminum
Non-ferrous metals
Wood
Plastics, wood and fiberglass
  • Double cut or Alternate cut is the most popular bur in ferrous applications
  • Manufactured with cuts made on the left and right spirals, this design produces a finer finish on material producing smaller chips and slivers
  • The double cut offers much smoother operation and greater tool control
  • Excellent for confined or hard-to-reach areas
  • Use for deburring, finishing, shaping and enlarging holes, removing welds, and smoothing castings
Application
Grinding, Finishing, Deburring
Metal
Ferrous Metals (iron, steel, welds, cast iron, etc.)
Stainless
Stainless steel and high tensile alloys
  • Our Best Economy Paper Disc
  • Aluminum oxide grain
  • Stearate coating and open coat structure lubricates and prevents loading
  • "B" light-weight, flexible paper backing
  • Available with Hook & Loop Backing or PSA Backing
Application
Finishing
Paint
Body filler, paint, primers
Metal
Ferrous metals
Aluminum
Non-ferrous metals
Wood
Plastics, wood and fiberglass
  • Best in Class. Fast stock removal with exceptional long life
  • Premium Ceramic Grain, premium stearated coating prevents loading
  • "C" medium-weight, low flexibility paper backing
  • Available with Hook & Loop Backing or PSA Backing
Application
Finishing
Paint
Body filler, paint, primers
Metal
Ferrous metals
Aluminum
Non-ferrous metals
Wood
Plastics, wood and fiberglass
  • High performance, ceramic grain, closed coat
  • Excellent for carbon steel grinding and finishing
  • Exceptional performance and value
  • Very uniform, high density grain structure is extremely durable and self sharpening for long life and cooler cut
  • Available in Bulk, Blue Line™ or Sait-lok™ Packaging
Application
Grinding, Blending
Metal
Carbon steel, cast iron
  • Our highest performing disc for stainless and high alloyed steels
  • 100% ceramic abrasive grain for exceptional grinding performance
  • Special grinding aids for reduced heat and loading and allows for cool cutting under the most demanding applications
  • Available in Bulk or Sait-lok™ Packaging
Application
Grinding, Blending
Stainless
Stainless steel, high tensile alloys
Metal
Carbon steel, cast iron
Aluminum
Non-ferrous metals (aluminum, copper, brass, etc.)
  • High performance, ceramic grain, closed coat with grinding aids
  • Excels on heat sensitive materials (stainless steel, etc.) and non-ferrous metals (aluminum, etc.)
  • Grinding aids for reduced heat and decreased loading
  • Exceptional performance and value
  • Available in Bulk, Blue Line™ or Sait-lok™ Packaging
Application
Grinding, Blending
Stainless
Stainless steel, high tensile steel, titanium
Metal
Carbon steel, cast iron
Aluminum
Non-ferrous metals (aluminum, copper, brass, etc.)
  • Special aluminum oxide grain
  • Provides consistent performance with long life
  • Heavy Duty Wheels: Designed with greater amounts of reinforcement for use on high-speed powered saws
Application
Cutting
Metal
Ferrous metals (steel, angle iron, rebar)
  • Special aluminum oxide grain formula
  • Fast, non-binding cutting
Application
Cutting
Metal
Ferrous metals
Stainless
Stainless steel, high tensile alloys
  • Aluminum oxide grain
  • For deburring and finishing
  • Fast stock removal
  • Shank Length 1-1/2"
Application
Grinding
Metal
Ferrous metals (iron, steel, welds, etc.)
  • Aluminum oxide grain
  • A finer grit for burr-free finish
Application
Cutting
Metal
Ferrous metals (metal tubing, etc.)
Stainless
Stainless steel, high tensile alloys
  • Aluminum oxide grain
  • Special non-loading formulation
Application
Cutting
Aluminum
Non-ferrous metals (aluminum, bronze, brass, etc.)
  • Aluminum oxide grain
  • Ideal for ID grinding and mold finishing
  • Shank Length 1-1/2"
Application
Grinding
Metal
Ferrous metals
  • For use on 9" cordless electric portable saws
  • Special aluminum oxide grain
  • Extremely fast burr-free cutting with long life
  • Exceptional performance
Application
Cutting
Metal
Ferrous and/or non-ferrous metals (iron, steel, stud, rebar, etc.)
  • Special aluminum oxide grain
  • Extremely fast burr-free cutting with long life
  • Exceptional Performance
Application
Cutting
Metal
Ferrous and/or non-ferrous metals (iron, steel, welds, etc.)
  • Special aluminum oxide grain
  • Extremely fast burr-free cutting with long life
  • Exceptional Performance
  • So unique it has a patent
Application
Cutting
Metal
Ferrous and/or non-ferrous metals (iron, steel, welds, etc.)
  • Aluminum Oxide Grain
  • Strong X-weight Egyptian cotton cloth backing
  • Closed coat structure
Application
Finishing, Surface Preparation
Metal
Ferrous and/non-ferrous metals (iron, steel, aluminum, copper, etc.)
Wood
Wood, plastic, fiberglass
  • High-quality aluminum oxide grain, open coat
  • Economical choice for general grinding
  • Fast material removal
  • Available in Bulk or Blue Line™ Packaging
Application
Grinding, Blending
Metal
Ferrous and/or non-ferrous metals (iron, steel, copper, aluminum, etc.)
Wood
Wood, fiberglass
  • Special silicon carbide grain
  • Superior cutting action
  • 40% longer life than general purpose concrete wheels
  • Heavy Duty Wheels: Designed with greater amounts of reinforcement for use on high-speed powered saws
Application
Cutting
Concrete
Masonry, asphalt, concrete
  • Long life
  • Extremely hard bond for cutting metals that present a very sharp edge to the wheel
  • Heavy Duty Wheels: Designed with greater amounts of reinforcement for use on high-speed powered saws
Application
Cutting
Metal
Thin metal, sheet metal, decking, other ferrous metals
  • Silicon carbide grain
  • Long life
  • Heavy Duty Wheels: Designed with greater amounts of reinforcement for use on high-speed powered saws
Application
Cutting
Concrete
Stone, brick, soft aggregate, masonry, concrete, schedule 40 and schedule 80 PVC pipe
  • For attaching fiber discs to backing pad and tool
  • Use SMALL for 4", 4-1/2", 5" diameter pads
  • Use LARGE for 7", 9" diameter pads
  • For use with Challenger II™ flexible grinding / blending wheels
  • Set includes 5/8-11 nut and pad
  • Aluminum oxide grain
  • Cotton fiber abrasive material will not smear on titanium and stainless steel
  • SAIT-LOK-R™discs are made of multiple layers of cotton fiber abrasive impregnated material. These quick change discs produce a smooth finish in one step. Nylon screw threaded hub for easy mounting to the backing pad.
Application
Finishing, Blending
Stainless
Stainless steel, high tensile alloys
Aluminum
Non-ferrous metals
Metal
Ferrous metals
  • A54MTX: Resin Bond for light removal/blending
  • A80GFX: Latex Bond with finer grit for ultimate finishing
  • Multiple layers of cotton impregnated with abrasive grain and special bonding agents allow for the coolest blending and finishing
  • Special cotton formula minimizes loading on soft, non-ferrous metals like aluminum
Application
Finishing, Blending
Stainless
Stainless steel, high tensile alloys
Aluminum
Non-ferrous metals
Metal
Ferrous metals
  • Multiple layers of cotton impregnated with abrasive grain and special bonding agents allow for the coolest blending and finishing wheels
  • Special cotton formula minimizes loading on soft, non-ferrous metals like aluminum
Application
Finishing, Blending
Stainless
Stainless Steel
Aluminum
Non-ferrous metals
Metal
Ferrous metals
  • Premium Aluminum Oxide Grain
  • Excellent for deburring tubing, blending radii, polishing inside contours, and polishing and finishing bell-mouth configurations, drop forge and Kirksite dies
Application
Finishing, Blending, Deburring
Metal
Ferrous and/or non-ferrous metals
Stainless
Stainless steel, high tensile steel
  • Double cut or Alternate cut is the most popular bur in ferrous applications
  • Manufactured with cuts made on the left and right spirals, this design produces a finer finish on material producing smaller chips and slivers
  • The double cut offers much smoother operation and greater tool control
  • Excellent for confined or hard-to-reach areas
  • Use for deburring, finishing, shaping and enlarging holes, removing welds, and smoothing castings
Application
Grinding, Finishing, Deburring
Metal
Ferrous Metals (iron, steel, welds, cast iron, etc.)
Stainless
Stainless steel and high tensile alloys
  • Combination aluminum oxide and silicon carbide formulation
  • Use the Ductile™ wheel for extra hard metals, hydraulic hose and PVC pipe
  • Heavy Duty Wheels: Designed with greater amounts of reinforcement for use on high-speed powered saws
Application
Cutting
Metal
Ductile pipe (very hard steel casing enclosing a cement lining), water mains, etc.
Concrete
Combination metal/concrete, cast iron, hard metals, concrete coated steel, etc.
  • Silicon carbide grain
  • Combination backing paper and cloth
  • Grits 12-20: Open coat structure prevents loading and is excellent for removing heavy finishes
  • Grits 36-100: Closed coat for more material removal and excellent for general refinishing
Application
Floor Sanding
Wood
Wood
  • Long life performance of a flap disc for use in confined spaces
  • More material, longer life than a single layer laminated disc
  • SAIT-LOK-R™ thread allows easy changeover between sanding discs, surface conditioning discs and buffing discs
Application
Grinding, Finishing, Blending
Metal
Ferrous metals
Stainless
Stainless steel, high tensile steel, titanium
Aluminum
Non-ferrous metals (aluminum, copper, brass, etc.)
  • Silicon carbide grain
  • Combination backing paper and cloth
  • Grits 12-20: Open coat structure prevents loading and is excellent for removing heavy finishes
  • Grits 36-100: Closed coat for more material removal and excellent for general refinishing
Application
Floor Sanding
Wood
Wood floors
  • Silicon carbide grain
  • Combination backing paper and cloth
  • Grits 16-20: Open coat structure prevents loading and is excellent for removing heavy finishes
  • Grits 36-100: Closed coat for more material removal and excellent for general refinishing
Application
Floor Sanding
Wood
Wood
  • Natural garnet grain
  • Open coat structure prevents loading; Use Dry Only
  • A-weight paper backing - light weight, high flexibility
  • C-weight paper backing - medium weight, medium flexibility
  • D-weight paper backing - heavy weight, low flexibility
Application
Hand Sanding, Sanding
Wood
Soft woods
  • Aluminum oxide grain provides a fast cut with long life, stearate coating and semi open coat structure prevents loading
  • 80-150 Grit: "D" - heavy-weight, low flexibility paper backing 180-400 Grit: "C" - medium-weight, low flexibility paper backing
  • For automotive body work, removing varnish from wood, sanding fiberglass, and for use on metal
  • For use on random orbital or low speed DA sanders - For dry use only
  • Available in PSA Disc Rolls
Application
Finishing, Surface Preparation
Paint
Body filler, paint, primers
Metal
Ferrous metals
Aluminum
Non-ferrous metals
Wood
Plastics, wood and fiberglass
  • Green silicon carbide grain
  • Extremely sharp grain for faster, burr-free cutting
  • Use on carbide tipped tools, cast iron
Application
Grinding
Metal
Ferrous and/or non-ferrous metals, carbide, cast iron
  • For use with SAIT-PAK™ 9" x 11" Sheets
  • Bear Cut - Substantially cuts production costs by removing more material per hour vs. standard carbide burs
  • More durable due to depth of teeth
  • More resistant to chipping and less prone to filling with chips
  • Excellent for confined or hard-to-reach areas
  • Use for deburring, finishing, shaping and enlarging holes, removing welds, and smoothing castings
Application
Grinding, Finishing, Deburring
Metal
Ferrous Metals (iron, steel, welds, cast iron, etc.)
Stainless
Stainless steel and high tensile alloys
  • Heavy Duty Wheels: Designed with greater amounts of reinforcement for use on high-speed powered saws
  • Rugged fiberglass reinforcement for maximum safety
  • Excellent for the railroad industry
Application
Cutting
Metal
Mainline, secondary, spur rail steel; Heavy sections of ferrous metals (I-beams, bar stock, etc.)
  • For use with Hook & Loop backed paper discs
  • Available 5/16-24 thread
  • Silicon carbide grain
  • Combination backing paper and cloth
  • Grits 12-20: Open coat structure prevents loading and is excellent for removing heavy finishes
  • Grits 36-100: Closed coat for more material removal and excellent for general refinishing
Application
Floor Sanding
Wood
Wood
  • For manual use with PSA or Sand-Light™ / Hook & Loop discs
  • For more uniform finish when hand sanding
  • Aluminum oxide grain
  • Paper backing
  • Open coat structure prevents loading, provides a smooth finish
  • Use dry
  • Easy-to-handle rolls for on-the-job "cut to size" use
Application
Sanding, Drywall Sander
Wood
Plaster, drywall joints
  • Premium aluminum oxide
  • Stearate coating and open coat structure lubricates and prevents loading
  • Long lasting performance and fast removal rates for fine finishing of automotive body works and wood finishing
  • Use dry only
  • C-weight paper backing - medium weight, medium flexibility
Application
Hand Sanding, Sanding
Wood
Body filler, paint, wood and fiberglass
Metal
Ferrous and non-ferrous metals
  • Combines coated and non-woven abrasives which allows you to "Grind & Finish" with one product reducing time and labor
  • Cushioned grinding effect allows for effortless blending and finishing of contoured work pieces
  • Aluminum oxide specifications available in coarse, medium, and very fine
  • Ceramic specification (High Performance) available in 40 grit and 60 grit - provides exceptionally long life
Application
Grinding, Finishing, Blending
Metal
Ferrous and/or non-ferrous metals
Stainless
Stainless steel, high tensile steel, titanium
Aluminum
Non-ferrous metals
  • Special bond for cutting sheet metal and other thin gauge metals
  • Fast, burr-free cutting
Application
Cutting
Metal
Ferrous metals (carbon steel, etc.)
Stainless
Stainless steel
  • Manufactured with premium ceramic grain
  • Extremely fast, burr-free cutting
  • Designed to outlast standard aluminum oxide wheels
Application
Cutting
Stainless
Stainless steel, high tensile alloys
Metal
Ferrous metals (steel, iron, welds, etc.)
  • General purpose
  • Zirconium grain on a durable polyester-cotton backing
  • Conical shape (Type 29) ideal for working with large surfaces or complex shapes
  • Working angle in is "built-in"
  • For general purpose stock removal and finishing
Application
Deburring, Finishing and blending, Contour finishing, Weld grinding and blending
Stainless
Stainless steel, high tensile steel
Metal
Ferrous and/or non-ferrous metals
Aluminum
Non-ferrous metals (aluminum, copper, brass, etc.)
  • Strong cloth screen impregnated with silicon carbide grain
  • Use wet or dry
  • Non-loading
  • Strong, long lasting
Application
Hand Sanding, Sanding, Drywall Sander
Wood
Body filler, paint, fiberglass
Concrete
Ceramic, marble, cement
Metal
Ferrous and/or non-ferrous metals
  • Cloth screen impregnated with silicon carbide grain
  • Long life
  • Non-loading
  • Double sided
  • Excellent for removing paint and varnish from floors
Application
Floor Sanding
Wood
Wood
Concrete
Ceramic tile, cement
  • Silicon carbide grain
  • Long life/ Non-loading/ Double sided
  • Excellent for removing paint and varnish
  • For orbital sanding machines
Application
Floor Sanding
Wood
Wood
Concrete
Concrete
  • Silicon carbide grain
  • Double sided for long life
  • Waterproof
  • Non-loading screen cloth
Application
Cleaning, Surface Preparation
Metal
Ferrous and/or non-ferrous metals (steel, solder, copper)
Concrete
Ceramic
Wood
Wood, paint, etc.
  • Premium Aluminum Oxide Grain
  • Excellent for deburring tubing, blending radii, polishing inside contours, and polishing and finishing bell-mouth configurations, drop forge and Kirksite dies
Application
Finishing, Blending, Deburring
Metal
Ferrous and/or non-ferrous metals
Stainless
Stainless steel, high tensile steel
  • Extremely long lasting
  • Open coat structure prevents loading
  • Use dry only
  • C-weight paper backing - medium weight, medium flexibility
Application
Hand Sanding, Sanding
Wood
Sealers, body filler, paint, fiberglass, wood
Metal
Aluminum
  • Premium aluminum oxide grain
  • Excellent for sanding and polishing channels, fillets, recesses, side walls, and bottoms of dead-end holes
  • Great for high speed deburring and flash removal
Application
Finishing, Blending, Deburring
Metal
Ferrous and/or non-ferrous metals
Stainless
Stainless steel, high tensile steel
  • Aluminum oxide grain
  • General purpose cool cutting on thin metals
  • Burr-free finish
Application
Cutting
Metal
Metal studding, thin rebar, light gauge metals
  • Premium aluminum oxide grain
  • Excellent for sanding and polishing channels, fillets, recesses, side walls, and bottoms of dead-end holes
  • Great for high speed deburring and flash removal
Application
Finishing, Blending, Deburring
Metal
Ferrous and/or non-ferrous metals
Stainless
Stainless steel, high tensile steel
  • For use on 9" cordless electric portable saws
  • Premium cermaic aluminum oxide grain
  • Exceptionally long-lasting design that maximizes productivity for fewer wheel changes
Application
Cutting
Metal
Ferrous and/or non-ferrous metals (iron, steel, stud, rebar, etc.)
Stainless
Stainless steel, high tensile alloys
  • Features our proprietary grain and bond system
  • Fast, free-cutting with long-lasting life
  • Premium performance cutting and light grinding for even the toughest applications
  • Ideal for root pass grinding
  • Type 27
Application
Cutting, Light Grinding
Metal
Ferrous metals (iron, steel, welds)
Stainless
Stainless steel, high tensile alloys
  • Features our proprietary high-ratio blend of ceramic grains for maximum stock removal
  • Extremely fast, free-cutting with exceptional life for the toughest applications
  • Easy to control, non-glazing design
  • Ideal for root pass grinding
  • Type 27
Application
Cutting, Light Grinding
Metal
Ferrous metals (steel, cast iron, etc.)
Stainless
Stainless steel, high tensile alloys
  • For use with Type 27 wheels on 7" and 9" 5/8-11 spindle grinders
  • Alternative to a throwaway hub
  • Specially formulated for nuclear and food processing plants
  • Specially formulated for contaminant-free cutting on stainless steel
  • Free of iron, chlorine and sulphur compounds (Fe + Cl + S < 0.1%)
  • Wheels are 1/16" thick
Application
Cutting
Stainless
Stainless steel and other high tensile alloys
  • Special aluminum oxide grain formula
  • Fast cutting action
  • Non-binding cutting formula
  • Heavy Duty Wheels: Designed with greater amounts of reinforcement for use on high-speed powered saws
Application
Cutting
Metal
Ferrous metals
Stainless
Stainless steel, high tensile alloys
  • Premium Zirconium Grain
  • Specially formulated X-weight Egyptian cotton cloth backing
  • Closed coat structure
Application
Finishing, Surface Preparation
Metal
Ferrous and/non-ferrous metals (iron, steel, aluminum, copper, etc.)
Stainless
Stainless steel, high tensile steel