Application
Grinding
Metal
Ferrous metals
Die Grinder
"O" = 1/2" See Tech Info
A60R
Vitrified Mounted Points
- Aluminum oxide grain
- Ideal for ID grinding and mold finishing
- Shank Length 1-1/2″
- These mounted bonded points are a low cost alternative to carbide burs
- Each point is dressed for perfect balance to perform without vibration or run-out
- Mandrel overhang "O" must always be the lowest possible. Maximum speeds given refer to overhang "O" equal to 1/2"
Click the sections below to expand
| Length | Type | Dia | Max RPM | Shank Diameter | Qty | PART # | |
| 1/4" | W160 | 1/4" | 81370 | 1/8" | 10 | 27308 | Buy Now |
| 3/4" | W177 | 3/8" | 33750 | 1/8" | 20 | 27310 | Buy Now |
| 2" | W189 | 1/2" | 24000 | 1/4" | 10 | 27327 | Buy Now |
| 1" | W196 | 5/8" | 35250 | 1/4" | 10 | 27329 | Buy Now |
| 3/4" | W204 | 3/4" | 42750 | 1/4" | 10 | 27320 | Buy Now |
| 2" | W208 | 3/4" | 18750 | 1/4" | 10 | 27330 | Buy Now |
| 1/8" | W215 | 1" | 38200 | 1/8" | 10 | 27338 | Buy Now |
| 1" | W220 | 1" | 25500 | 1/4" | 10 | 27360 | Buy Now |
| 2" | W222 | 1" | 15900 | 1/4" | 10 | 27340 | Buy Now |
| 1/4" | W225 | 1-1/4" | 30560 | 1/4" | 10 | 27350 | Buy Now |
| 1/2" | W236 | 1-1/2" | 25470 | 1/4" | 10 | 27349 | Buy Now |
| Length | Type | Dia | Max RPM | Shank Diameter | Qty | PART # | |
| 1-1/4" | A12 | 11/16" | 48000 | 1/4" | 10 | 27050 | Buy Now |
| 1-1/8" | A5 | 3/4" | 45000 | 1/4" | 10 | 27035 | Buy Now |
| 1-1/4" | A4 | 3/4" | 30560 | 1/4" | 10 | 27030 | Buy Now |
| 2-1/2" | A1 | 3/4" | 19800 | 1/4" | 10 | 27010 | Buy Now |
| 2" | A11 | 7/8" | 19860 | 1/4" | 10 | 27040 | Buy Now |
| 1" | A21 | 1" | 34500 | 1/4" | 10 | 27060 | Buy Now |
| 1" | A38 | 1" | 34500 | 1/4" | 10 | 27088 | Buy Now |
| 2-3/4" | A3 | 1" | 16100 | 1/4" | 10 | 27020 | Buy Now |
| ROUND | A25 | 1" | 35620 | 1/4" | 10 | 27070 | Buy Now |
| 3/8" | A36 | 1-5/8" | 23520 | 1/4" | 10 | 27086 | Buy Now |
